Hiding your security cameras in unique and creative places may give you the extra protection needed to help protect your home and family from theft. Here are 3 creative places to hide your home security cameras.

In a Potted Plant
Get creative! Your camera will not be so easily spotted if you hide it inside a nondescript household object. Make sure to use something that you would usually keep in your room or office; an out-of-place object may arouse suspicion.
Consider hiding the camera in the leaves of a potted plant or deep in the recesses of a bookshelf–anywhere that someone will be unlikely to look closely. Make sure that the camera lens is pointing where you need it to point. Source: wikiHow

In a Bird Box
An ordinary bird nesting box can make a fantastic disguise for a camera. Choose a style that is completely enclosed, with just a small hole in the front for birds to enter and exit. The lens of a small bullet camera can sit just behind this hole, capturing everything that happens outside your property without being seen. If you are using a wired camera security system, then you will need to drill a hole in the rear of the box for the cables. A wireless security camera can simply be placed inside the box and connected wirelessly to the home security network. You can then mount the box on the side of your house or on a garden wall or fence. The advantage of using a bird box as a disguise, rather than a garden ornament or rock, is that you can use a high vantage point, which could give you a better view of intruders’ faces. Source: eBay

Under a Light Switch
We learned that it worked perfectly well with the iCam software and their tech support was familiar with this unit. It took all of 15 minutes to set it up via a web browser while being wired to our computer.
We made the square cut using an X-acto knife and got the power from our friendly AC outlet, snaked the wires through the opening and started working with the blank light switch plate template for the lens and status light’s openings.
This took a little bit of trial and error, but we finally found the perfect location. We used a regular hot glue gun to attach the camera (which we stripped from its pedestal base to minimize footprint) to the switch plate.  Source: ApartmentTherapy

Contact:
Mr. Locksmith
555 W. Hastings St
L21A
Vancouver BC V6B 4N4
Canada