For further information go to Mr. Locksmith
Unboxing Lock Tech GM Ignition Removal Tools
So we have a new “toy”, from LockTech. Instead of an unboxing, we will call it an “unbagging”. It’s a full set from AccuReader LockTech. And this is the ignition removal tools. A onewhole set, is all four of them. Rather than buy one at a time, just buy the whole thing. It would save you some money. And again, this is an unbagging, not unboxing. It has never been opened, and it will be the first time of us “playing” with it. We’ve been using AccuReader LockTech’s tools for years, so it is the first time getting like the whole little set here.
So get that there. It is a total unbagging. They’re easy to tell apart which is kinda cool. So we’ve got a blue side, a yellow side, a green one with a toy. So we got the whole set here of four. Most of their products, by the way are extremely well made. So it does the trick. And we’ll show this in action, this is just an unbagging today, we’ll show it in action down the road.
These four different tools, they call it the V1, V2, V3, V4. And this’ll take out the ignitions on a whole lot of cars like the Chevrolet Cruzes, Chevrolet Colorado, Silverado, the Alero. It is an interesting tool for me. It’s removing the ignition cylinders from GM vehicles without drilling or damaging which is very cool. We’ve had their other products even before. Some of these are earlier ones, but they’re as fantastic. Instructions comes with the bag.
All four (4) of GM Ignition Removal Tools Set
We’ll post some videos of us playing with this. So I hope that helps a little bit. We will play with some ignitions later, but right now this is just an unbagging of a brand new “toy” from AccuReader LockTech for us. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my nondestructive methods of entry.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities
]]>Certificate in Institutional Locksmithing On-Line Series
Regular price: $1995.00
12 – 24 Months Institutional On-Line Locksmithing Class which is designed to teach engineering or maintenance employees for large facilities (School, Hospital, Corrections, etc.).
Complete Series: Includes all Introduction to On-Line Locksmith Training and an added Bonus the Consumer Safe Series (Sentry Safes, First Alert Safes, Hotel Safes, etc.) and Institutional Safes.
ORDER NOW
OUR ONLINE INSTITUTIONAL LOCKSMITH TRAINING COVERS THE FOLLOWING TOPICS
- Rekeying Locks
- Lock Down Procedures
- Active Shooter
- Lock Hardware for Active Shooter
- Master-keying
- Key Control
- Institutional Software for Key and Lock Control
- High Security Locks
- Emergency Lock Down Procedures
- Emergency Lock Down Locks and Doors
- Servicing Panic Hardware
- Institutional Locksmith Training
- Active Shooter
- And More…
ORDER NOW
Institutional Locksmith Hands-on Class On-Site at Your Facility
I offer a 1-4 Day Institutional Locksmithing Class which is designed to teach engineering or maintenance employees for large facilities (School, Hospital, Corrections, Policing, etc.). The 4 Day Institutional Locksmithing Class is available onsite with a minimum of four (4) students. Call or e-mail to arrange a class or for next course dates.
Mr. Locksmith Hands-On Locksmith Training in Las Vegas!
Mr. Locksmith Hands-on Locksmith Training in Las Vegas
For further info go to Mr. Locksmith Training.
Real hands-on locksmithing class designed to teach engineering or maintenance employees for small or large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners to help you become a locksmith, In-House Institutional Locksmith or start your own locksmith business.
Upcoming Classes in LAS VEGAS, NEVADA
- September 17-20, 2018 – Sign up here
- October 22-25, 2018 – Sign up here
- November 12-15, 2018 – Sign up here
Mr Locksmith Training Las Vegas
In this training you will:
- Cut and duplicate keys on code key machines and key duplicator machines.
- Rekey locks
- Shim
- Trouble shoot
- Pick locks
- Take apart (and put back together) locks (deadbolts and key in knobs).
- Lock-outs, broken keys and picking locks.
- Design a mini Master key system and master key their locks.
- Rekey Deadbolt
- Rekey Key in Knobs
- Shiming a lock
- Locksmith Training
- Picking a lock
- Opening a lock with no keys
- Single pin picking, Feel Method, French Method
- Raking, Jiggling, Bumping, Scrubbing
- Can you lock even be picked?
- High Security Locks
- Tubular, Ace, etc.
- Lock has malfunctioned.
- Reading
- Buying Picks
- Making Picks
- Electronic Picks
- Pick Guns
- Methods of Entry
- Legal Issues
- Tactics
- Tools
- Preparation for Entry
- Setup your own Lock Practice Boards
- Automotive Lock Picking
- Other Lock Bypass Methods
- DAME (Defense Against Methods of Entry)
- And lots more!
The Mr. Locksmith Hands-On Locksmithing Course includes all supplies, lock picks, tools and material needed to take the course with.
This class is only $1,500.00.
Terry Whin-Yates is a 3rd Generation Locksmith with over 30+ years of locksmithing experience and a BA (Hons) in Criminology. I will teach you how to rekey and pick locks like a Professional Locksmith. This is a Hands-On Locksmith Class covering basic to advanced Lock Picking Methods and Techniques. Learning how to pick open locks starts with learning the basic to advanced methods of lock picking. The locksmith student will learn the various methods of picking open a lock. I have been teaching locksmith, military and police for over 30 years how to pick open deadbolts, key-in-knob, padlocks, filing cabinets and “pick resistant” and “pick proof” locks. The lock picking class will cover the basic methods are as “Rake,” “Feel” and “Rake and Feel” lock picking methods to advanced lock picking techniques to open locks with mushroom, spool and spiral pins.
All Lock Picking Students will get access to my five (5) online video on Picking Locks, Using Plug Spinners, etc. and my new book. FREE for all students! As an added bonus you will get a copy of my new book “Penetration Expert:”How to be a Professional Lock Picker” for FREE and access to Five (5) or my Private On-line Lock Picking Videos. Important Note: All students must pass a Criminal Records Check / Security Clearance from your local Police Force.
All past students will also receive a special bonus! I’ll also throw in a Lab Smart Wedge Universal Pin Kit (.003) a $200 value!
In addition, if you want to purchase lock picks and join the “Penetration Expert: Locksmiths Always Get In” Lock Picking Club you must pass a Criminal Records Check / Security Clearance.
Upcoming Classes in LAS VEGAS, NEVADA
- September 17-20, 2018 – Sign up here
- October 22-25, 2018 – Sign up here
- November 12-15, 2018 – Sign up here
See you in Las Vegas!
“If I’d only known, I would have been a locksmith.” Albert Einstein
Visit my website for On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to http://mrlocksmithtraining.com/
Terry Whin-Yates BA (Hons) Criminology, 3rd Generation Locksmith, 35+ Years Locksmith email: terry@mrlocksmith.com
Terry Whin-Yates is the Founder CEO & President of Mr. Locksmith and Mr. ProLock.
]]>
Mr. Locksmith (604) 259-2953
For further information go to Mr. Locksmith
When you rent a car you usually give you two car keys/fobs crimped together on a metal wire. If you lose the keys you could be liable to replace not one but two keys and it could cost you $250-$700.
When I travel I usually have no tools, my Leather Man or Swiss Army knife (AirPort Security). A very simple method for breaking the crimped key chain wire is to just twist the two keys clockwise until either the cable or the crimp breaks.
Liked this video? Like, Share and Subscribe to Mr. Locksmith on YouTube.
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>
THESE PRICES AVAILABLE ONLY UNTIL May 31, 2018. YOU MUST BOOK BEFORE THEN.
Mr. Locksmith Abloy High Security Deadbolt
Residents of Vancouver, you have spoken, we have listened. 90% of break-ins are preventable, including at your complex. We’ve put together some recommendations on security upgrades for your complex and for your individual units. The Taymor locks that were installed on your property during the building envelope renovation are not high security. They’re a $10 deadbolt. They are not bump resistant, nor pick resistant. Mr. Locksmith is the largest locksmith company in the Lower Mainland.
If you wish to book an appointment to improve the security of your home book online.
I am also willing to come to your Strata or Condo AGM or if the owners decide, a security meeting.
Be proactive, do not let a burglar break-in because of a low quality deadbolt installed on your front door.
I train Locksmiths, Military, Police and Government agencies convert and overt methods of entry. The one Deadbolt on the market that has “no known convert” methods of entry and what I consider not only “pick resistant” but “pick proof” is Abloy Protec 2 Deadbolts. Most thieves go for the front door instead of the back door, or the windows. They act like they’re going to buy something, then kick the door in.
Mr. Locksmith
is an ABLOY® Protec Authorized Dealer
Abloy High Security Deadbolt
Abloy High Security Deadboltt front Door view
Abloy High Security Deadbolt front view
Abloy Deadbolt inside view
Abloy Deadbolt front view
Abloy Deadbolt Vancouver Special front view with Door Reinforcer
Abloy Deadbolt Vancouver Special front view with Door Reinforcer
18″ Strike Plate with 3″ screws to secure the plate to the frame and studs to prevent kick-ins.
Abloy Deadbolt Vancouver Special front view with Door Reinforcer
Abloy Deadbolt Vancouver Special with Door Reinforcer
Abloy High Security Deadbolt Vancouver Special inside view with T-Turn / Door Reinforcer
Prepping the door for installation of an Abloy Deadbolt, Door Reinforcer and Strike Plate (Vancouver Special)
If I get locked out, I know that it will not be an easy job gaining access through my Abloy High Security Deadbolt Protec 2 deadbolt. Most deadbolts and High Security deadbolts can be drilled open is seconds or minutes. I know that I or anybody will be spending a lot of time, effort and money trying to destroy my Abloy deadbolt.
If you wish to book an appointment to improve the security of house or condo book online.
The face of the Abloy High Security Deadbolt has hardened steel and will chew up a dozen expensive drill bits I use to open safes.
Note: most safes are opened with one drill bit.
I have reinforced my door with a Mag Plate that doubles the strength of the door and I have reinforced the door frame with an 18″ strike with 4″ screws attaching it to the door frame making the door and frame more difficult to force or kick open.
Bottom Line: I want to protect my family, my home and my stuff and I sleep better and go to work or vacation knowing I have the best lock, ABLOY Protec 2 deadbolt installed on my doors.
We at Mr. Locksmith suggest Vancouver residents upgrade to an Abloy High Security Deadbolt deadbolt with the following.
MAY 31, 2018 PRICING:
– Abloy deadbolt supplied and installed price per door: $550-$650 + $30 per key.
– OR Schlage B660 with Commercial Grade key and cylinder $400 / $7.50 per key
– Door reinforcer: $45
– 18″ Frame / Strike reinforcer with 3″ screws: $45
– 12″ Interlocking plate: $55
– Full Length Interlocking plate: $200
All prices supplied and installed. GST & PST extra.
There are Vancouver residents who are concerned with their security and have determined that they will require a high security lock. One of the reasons for this has to do with the problem of “Bump Keys” that have recently been highlighted in the news. A Bump Key is a device that works much like a lock pick. In addition, information regarding its construction and use is available to anyone online. As a matter of fact there are literally hundreds of videos detailing how to make and utilize a Bump Key on the Internet!
To make this situation even more serious, it doesn’t take any real level of expertise to use a Bump Key on your Taymor locks in Greenside Estates, since they are easier to use than a lock pick. Also, since a Bump Key resembles a normal key, law enforcers are less prone to noticing them, as opposed to lock picking tools. For this, and other reasons, bump-resistant and pick-resistant locks are in high demand. For locking systems of this nature, one of the most trusted names in deadbolts and other locking devices is Schlage.
Primus High-Security and Schlage B Series Locks
Schlage offers high-security Primus keys and cylinders and can also provide a 2nd milling that gives the advantage of a seamless integration with a current Schlage lock. This will also deter an unauthorized key replication by requiring an entry that is based on a pre-approved signer’s list.
The Schlage B600 Series is a commercial grade deadlock that is also exceptionally good for residential use especially in Greenside Estates, as well. This series of deadlocks possess bronze or solid brass cylinder collars along with an “ice-pick resistant” security shield. They also have ball bearings made of hardened steel, which are designed to protect their 2 heavy¼” mounting bolts against attacks that use a drill bit.
The entire B-Series (standard strikes) include a reinforcer that will attach to a wood frame with 2 heavy 3-inch screws. This design allows it to resist a kick-in attack. It will also resist cylinder wrenching due to its reinforced collars.
These locking systems can be used for more than just securing an entrance door. They are also perfect for protecting; storage facilities, pool gates, utility spaces and anywhere else where a high level of security is desired. The B600 series deadbolts can also be obtained with a choice of solid brass or bronze trim rings.
Specifications For the Schlage B 600 Series
- Fits 1-1/2″ and 2-1/8″ lock bores
- Meets ANSI A156.5, 1992, Grade 1 specifications
- 1″ Bolt throw with concealed hardened steel roller to resist cutting or sawing the latchbolt
- 2-3/4″ or 2-3/8″ backset latch
- Accommodates door thicknesses between 1-3/4″ and 2″
We were asked about how to protect your cars, sheds, and windows and patios.
I have the Top 10 security tips to secure your home during the holiday season.
1- Lock Your Doors
2- Lights, leave the TV on
3- Mail
4- Newspapers/Flyers, etc.
5- Alarms
6- CCTV
7- No Gifts seen from the street under the Christmas Tree
8- Lock your windows, doors, etc. all the time.
9- No Empty boxes outside showing off your new TV etc.
10- Facebook and Social Media
Bonus: Engrave everything, take pictures and serial numbers.
We get it, you are proud of your acquisitions and your possessions. There is no shame in that as you have worked hard to obtain all these items after all. However, remember a constant stream of boxes littered on obvious places in your house such as TV boxes scattered by the trash bin outside, online shopping shipments delivered to your homes, etc. is one way to get you noticed. Remember, robbers usually scout neighborhoods and mark potential homes as targets before committing a robbery and if you are constantly leaving traces of your purchases outside your home, you may be as well as pointing a big red arrow towards your house.
Leaving the Doors and Windows Unlocked
Over a third of burglars enter the house through the front door. After knocking to confirm no one is home, they’ll test the door to see if it’s unlocked. An alarming number of times they’ll discover they’ve hit the jackpot and walk right in. Keep your doors locked, even if you’re just running the kids to school or walking the dog. As a law enforcement officer, I took several reports of burglaries that occurred while the homeowner was right in the backyard playing with the kids. So don’t assume your presence will scare him away.
Lack of a Security System
When keeping your home safe, it’s important to leverage all your assets. This could be neighbors, proper gardening, and the police. But with cops on call several miles away, it’s unlikely that a law-abiding passerby will report a break-in. A security system can help automate this whole process for you, using censors to detect intrusion and reporting the incident to the security company, who can contact the proper authorities. You’ll need allies in your fight against burglars, and a security system is your Bat Signal.
Cars:
Realistically, cars will always get broken into if they are outside in your clusters or your visitor parking. Auto crime is huge in both Surrey and Langley. Because Greenside Estates does not have a garage, we suggest an alarm and a club to secure them. Do not leave valuables inside of your vehicle at any time.
Windows and Patios:
A Greenside Estates resident mentioned that her neighbours living was broken to enter the house. 3M break resistance film that’s also earthquake resistant will help prevent this. Do not leave your windows and patio door unattended. When leaving your property, close all of your windows and lock them. Unlocked doors and unlocked windows are an open invitation to thieves.
Sheds:
Many residents at Greenside Estates own sheds. Shed security depends on the door, but almost exactly the same protection as your front door (when properly secured). We would install a door blocker on your shed that would fit on the front of the shed deadbolt.
Mail Boxes:
Mr. Locksmith replaces and repairs mailboxes in most cases within 24 hours. There is no reason you need to replace everything. Be cost-effective. Contact us and we’ll give you a quote on fixing your mailroom fast, quick and easy.
If you wish to book an appointment to improve the security of your Vancouver home, call (604) 330-9915 or book online.
Terry Whin-Yates is the Founder, CEO & President of Mr. Locksmith email: tery@mrlocksmith.com
]]>For further information go to http://mrlocksmith.com/
Changing Toyota Remote Battery
This is a three-button Toyota remote. Very, very simple. Just lock, unlock and it’s got the panic button on the inside, which I didn’t see at first. This one’s for the older Toyotas. When you look at it, there’s no screws, there’s no screws anywhere on it. It’s pretty much sealed except for at the back, you can see. Not a dime would fit in that, so we use a little flat-head screwdrivers. I’m gonna use my Leatherman. But, you just can’t twist it out. You gotta slide it out because it’s got the little tabs over it. It has an extremely popular battery. The battery is a CR2032. Popular for a lot of different remotes, remote-head keys and proxes.
To put the battery in, you just gotta slide it in and that’s perfect. So we’ve done a very good weather stripping on this. So there we go. There is our Toyota remote.
Mr. Locksmith CR2032
Steps on how to change a Toyota remote battery:
- First, see if it had the ring on. If so, just take the ring off.
- Use your Leatherman or flathead screwdriver. There’s no screws. You can tell by looking at it.
- Just give it a little twist (make sure you don’t take much force).
- And make sure to do it without everything falling every which way.
There we go. That’s a nice one. Just make sure that you didn’t spill everything when you twist it. Again, we have to slide this battery out. Don’t twist and pull. We’ve got little metal tabs over the battery. Just slide it out, and it comes out nicely. The CR2032, is an extremely popular for Toyota remote battery. And, I mostly just use Energizers or Duracell batteries. I don’t like the dollar store stuff that much as I prefer the better quality. The dollar store doesn’t usually sell Duracells, or Energizers. I usually find Walmart has the cheapest, the least expensive parts. If you lose track of which way it goes because there’s no positive or negative, few tips – The little contacts always go to the opposite to the plus (or the writing). Just slide the battery back in. Slide it in nicely. And then just clip it together. On the video, it came apart a lot nicer the second time around. I hope you enjoyed watching this video. Subscribe to my channel.
Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my non-destructive methods of entry.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>For further information go to www.mrlocksmith.com
My daily Auto Key Programmer is the HotWire and the MVP Pro. I am on the unlimited token plan for both programmers. For the past 5+ years, I have been purchasing and testing “Offshore Auto Key Programmers.”
I have several Off Shore MVP clones. The price was so low, we keep on testing to see if any Off Shore Key Programmer could replace our existing programmers.
The MVP Clones are poorly made and no consistency or reliability with the software.
One Off Shore clone will program Ford and Chrysler but not Honda. Another identical clone will do Honda but not some Fords.
Another clone may work on a Nissan, but no one unit will do everything. It’s just been a zero.
So we kept on buying these, kept on testing them. Our dongles would break. The units would break. They’d fall apart. The software was inconsistent.
However, we found one clone that consistently worked well with Honda reflashes, specifically the 1998-2002 Honda Preludes.
In the early day we were just trying to save tokens, and really did we save any money? No, the clones were not good. There’s no consistency.
But again, if you don’t try, you don’t know. And there are some good units out there that the Chinese are coming out with now that are making some of the good stuff look bad.
Some of the new offshore auto key programmers they are using their own software, their own designs, and they are not clones or scammer units. Some of the Off Shore Key Programmers actually seem to be getting there.
Well, they’re coming out with nice updates on them, so they are becoming consistent.
The thing is with everything, you could have an Offshore made, really good programmer, and now they have counterfeit units of that that are total garbage.
So why are some of these Auto Key Programmers $300 and the other unit’s $50? The $50 unit is a total clone and it’s a total piece of garbage. How do you know? You don’t. That’s the big problem.
One way to find out is if you read the automotive forums.
Talk to other Locksmiths and view our videos.
The various plugins quality was all over the map. Some very good forums on Facebook, KeyPro website, ClearStar, etc.
So far, again, we’ve talked about this before, our go-to units are the MVP Pro and Hotwire.
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
So again, stay tuned for our other videos in the series. This is the MVP Pro. Thank you. I hope you enjoyed watching this video.
Subscribe to my channel.
If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email Randy@mrlocksmith.com
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>
For further information go to http://mrlocksmith.com/
One of my go-to books for making keys to cars and motorcycles is “2015 Edition FAST FACTS — 1965-2015 Auto’s and Cycles” by Robert G Sieveking from Sieveking Products Company. This is a great book. This is the 2015 version. Every two years, a new updated version comes out.
This is my go-to fast book when I’m talking to customers when I’m going out to the job, it has most if not all of the domestic automotive, five-ton trucks, highway trucks, and it also has extensive motorcycles. This is a fantastic book, I highly recommend it.
The “Helps Section” gives pointers and many specific transponder programming procedures that have been tested and proven in actual use. GM VATS system information, key progressions and special notes on a number of autos give you the benefit of nearly 40 years of “on the road” experience. The motorcycle index is the largest listing of 2-wheeled vehicles anywhere.
is the premier Locksmiths reference to foreign & domestic auto and motorcycle keys. Fast Facts is an encyclopedic listing of cars and motorcycles found in the North American Market from 1965 to present. In its 11th Edition (2010-15) the fast Facts book is a “Must-Have” item for all locksmiths that make keys for autos and motorcycles. Much expanded for 2015. There are now over 200 motorcycle key plates and 638 auto key plates. Many new or changed transponder Facts. The Index lists 3761 autos and over 1400 motorcycles. presents a Clear, Concise and Fully Indexed key making guide for autos and motorcycles. The NEW expanded motorcycle model index lists over 1400 motorcycle models, plus an additional 15 pages of Chinese and Korean motorcycles, scooters and handicap electric motorized chairs. Everything is at your fingertips. Fast Facts is clearly illustrated and fully indexed. Fast Facts contains more information than any other publication of its kind.
I hoped you enjoyed watching this video. Subscribe to my YouTube channel.
If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email Randy@mrlocksmith.com
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>For further information go to Mr. Locksmith Vancouver.
This years 2017 Stanley Park Ghost Train takes our riders on a journey through a mystical and magical world, inspired by Hallowe’en and other spooky tales. This family event is open to all ages and offers a fright free glimpse of the whimsical world of ghosts and ghouls. The Stanley Park Ghost Train is “Alien Invasion!”
Location: The Stanley Park Train is located on Pipeline Road in Stanley Park, via the West Georgia Street park entrance Vancouver British Columbia.
Vancouver Stanley Park Ghost Train
Vancouver Stanley Park Ghost Train
Vancouver Stanley Park Ghost Train
Vancouver Stanley Park Ghost Train
Vancouver Stanley Park Ghost Train
Vancouver Stanley Park Ghost Train
Mr. Locksmith Vancouver info@mrlocksmith.com
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>
For further information go to Mr. Locksmith
The Melting Clock by Salvador Dali is called the Dance of Time I, the bronze sculpture is more than two metres high but will seem even taller on its 60 cm plinth. Dalí, who died in 1989, remains one of the 20th century’s most recognizable figures both for his distinctive Surrealist paintings and sculptures, but also for persona as a celebrity artist.
Dalí Melting Clock in Downtown Vancouver
Dalí Melting Clock in Downtown Vancouver Dance of Time I, the bronze sculpture is more than two metres high.
Dance of Time I, the bronze sculpture is more than two metres high
The sculpture is located in the mini-park known as Lot 19 at West Hastings and Hornby.
A melting clock is probably the one image most often associated with Dalí. Three melting clocks — as well as a stopwatch covered with ants — first appeared in Dalí’s figurative and dreamlike painting Persistence of Memory in 1931. For Surrealists, soft clocks referred to the relativity of time and space. For Dalí, symbols had a very personal meaning and often related to how he thought about objects and their ‘hardness’ or ‘softness’. He said he was inspired to create soft clocks after seeing melting Camembert cheese during a meal.
Dance of Time I is the sixth of eight sculptures made from the same mould. Although the surface of bronze can oxidize to create a green patina, the green on Dance of Time I is from an applied enamel paint. If you look at the numbers on the face of the stopwatch, numeral 6 at the bottom is missing. Dance of Time I was cast in 1984 and is valued at $750,000. It is owned by the Stratton Institute, a non-profit organization based in Switzerland.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>