For further information go to Mr. Locksmith
So we have a new “toy”, from LockTech. Instead of an unboxing, we will call it an “unbagging”. It’s a full set from AccuReader LockTech. And this is the ignition removal tools. A onewhole set, is all four of them. Rather than buy one at a time, just buy the whole thing. It would save you some money. And again, this is an unbagging, not unboxing. It has never been opened, and it will be the first time of us “playing” with it. We’ve been using AccuReader LockTech’s tools for years, so it is the first time getting like the whole little set here.
So get that there. It is a total unbagging. They’re easy to tell apart which is kinda cool. So we’ve got a blue side, a yellow side, a green one with a toy. So we got the whole set here of four. Most of their products, by the way are extremely well made. So it does the trick. And we’ll show this in action, this is just an unbagging today, we’ll show it in action down the road.
These four different tools, they call it the V1, V2, V3, V4. And this’ll take out the ignitions on a whole lot of cars like the Chevrolet Cruzes, Chevrolet Colorado, Silverado, the Alero. It is an interesting tool for me. It’s removing the ignition cylinders from GM vehicles without drilling or damaging which is very cool. We’ve had their other products even before. Some of these are earlier ones, but they’re as fantastic. Instructions comes with the bag.
We’ll post some videos of us playing with this. So I hope that helps a little bit. We will play with some ignitions later, but right now this is just an unbagging of a brand new “toy” from AccuReader LockTech for us. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my nondestructive methods of entry.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities
]]>Mr. Locksmith (604) 259-2953
For further information go to Mr. Locksmith
When you rent a car you usually give you two car keys/fobs crimped together on a metal wire. If you lose the keys you could be liable to replace not one but two keys and it could cost you $250-$700.
When I travel I usually have no tools, my Leather Man or Swiss Army knife (AirPort Security). A very simple method for breaking the crimped key chain wire is to just twist the two keys clockwise until either the cable or the crimp breaks.
Liked this video? Like, Share and Subscribe to Mr. Locksmith on YouTube.
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>
For further information go to our New Westminster Locksmith website http://www.mrlocksmithnewwestminster.com/
Randy has been with Mr. Locksmith as a fully qualified locksmith for almost 10 years now and is now the new Mr. Locksmith Franchisee for New Westminster, Delta, North Delta, Annacis Island and Ladner. Randy is also an Automotive Locksmith and a Licensed Auto Mechanic. Randy is an Authorized Abloy Protec 2 Dealer, Schlage Primus and other High Security Locks.
Again, Congratulations to Randall (Randy) Bath.
Randy at Mr. Locksmith New Westminster provides emergency locksmithing services for residential, commercial and automotive. Our fully qualified, licensed and insured locksmiths in New Westminster are available 24/7/365.
We offer the following services:
And much more! We cover every corner of New Westminster Locksmith and Annacis Island Locksmith– New Westminster with locksmith services. If you have an issue with your locks or keys, don’t wait any longer and call Mr. Locksmith New Westminster or book your appointment online now.
Mr. Locksmith New Westminster Call Randy 604-259-2522
Terry Whin-Yates is the Founder, President and CEO of Mr. Locksmith and is proud to have known Randall Bath for 35+ years.
]]>
For further information go to http://mrlocksmith.com/
This is a three-button Toyota remote. Very, very simple. Just lock, unlock and it’s got the panic button on the inside, which I didn’t see at first. This one’s for the older Toyotas. When you look at it, there’s no screws, there’s no screws anywhere on it. It’s pretty much sealed except for at the back, you can see. Not a dime would fit in that, so we use a little flat-head screwdrivers. I’m gonna use my Leatherman. But, you just can’t twist it out. You gotta slide it out because it’s got the little tabs over it. It has an extremely popular battery. The battery is a CR2032. Popular for a lot of different remotes, remote-head keys and proxes.
To put the battery in, you just gotta slide it in and that’s perfect. So we’ve done a very good weather stripping on this. So there we go. There is our Toyota remote.
Steps on how to change a Toyota remote battery:
There we go. That’s a nice one. Just make sure that you didn’t spill everything when you twist it. Again, we have to slide this battery out. Don’t twist and pull. We’ve got little metal tabs over the battery. Just slide it out, and it comes out nicely. The CR2032, is an extremely popular for Toyota remote battery. And, I mostly just use Energizers or Duracell batteries. I don’t like the dollar store stuff that much as I prefer the better quality. The dollar store doesn’t usually sell Duracells, or Energizers. I usually find Walmart has the cheapest, the least expensive parts. If you lose track of which way it goes because there’s no positive or negative, few tips – The little contacts always go to the opposite to the plus (or the writing). Just slide the battery back in. Slide it in nicely. And then just clip it together. On the video, it came apart a lot nicer the second time around. I hope you enjoyed watching this video. Subscribe to my channel.
Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my non-destructive methods of entry.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>For further information go to www.mrlocksmith.com
My daily Auto Key Programmer is the HotWire and the MVP Pro. I am on the unlimited token plan for both programmers. For the past 5+ years, I have been purchasing and testing “Offshore Auto Key Programmers.”
I have several Off Shore MVP clones. The price was so low, we keep on testing to see if any Off Shore Key Programmer could replace our existing programmers.
The MVP Clones are poorly made and no consistency or reliability with the software.
One Off Shore clone will program Ford and Chrysler but not Honda. Another identical clone will do Honda but not some Fords.
Another clone may work on a Nissan, but no one unit will do everything. It’s just been a zero.
So we kept on buying these, kept on testing them. Our dongles would break. The units would break. They’d fall apart. The software was inconsistent.
However, we found one clone that consistently worked well with Honda reflashes, specifically the 1998-2002 Honda Preludes.
In the early day we were just trying to save tokens, and really did we save any money? No, the clones were not good. There’s no consistency.
But again, if you don’t try, you don’t know. And there are some good units out there that the Chinese are coming out with now that are making some of the good stuff look bad.
Some of the new offshore auto key programmers they are using their own software, their own designs, and they are not clones or scammer units. Some of the Off Shore Key Programmers actually seem to be getting there.
Well, they’re coming out with nice updates on them, so they are becoming consistent.
The thing is with everything, you could have an Offshore made, really good programmer, and now they have counterfeit units of that that are total garbage.
So why are some of these Auto Key Programmers $300 and the other unit’s $50? The $50 unit is a total clone and it’s a total piece of garbage. How do you know? You don’t. That’s the big problem.
One way to find out is if you read the automotive forums.
Talk to other Locksmiths and view our videos.
The various plugins quality was all over the map. Some very good forums on Facebook, KeyPro website, ClearStar, etc.
So far, again, we’ve talked about this before, our go-to units are the MVP Pro and Hotwire.
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
So again, stay tuned for our other videos in the series. This is the MVP Pro. Thank you. I hope you enjoyed watching this video.
Subscribe to my channel.
If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email Randy@mrlocksmith.com
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>
For further information go to http://mrlocksmith.com/
One of my go-to books for making keys to cars and motorcycles is “2015 Edition FAST FACTS — 1965-2015 Auto’s and Cycles” by Robert G Sieveking from Sieveking Products Company. This is a great book. This is the 2015 version. Every two years, a new updated version comes out.
This is my go-to fast book when I’m talking to customers when I’m going out to the job, it has most if not all of the domestic automotive, five-ton trucks, highway trucks, and it also has extensive motorcycles. This is a fantastic book, I highly recommend it.
The “Helps Section” gives pointers and many specific transponder programming procedures that have been tested and proven in actual use. GM VATS system information, key progressions and special notes on a number of autos give you the benefit of nearly 40 years of “on the road” experience. The motorcycle index is the largest listing of 2-wheeled vehicles anywhere.
I hoped you enjoyed watching this video. Subscribe to my YouTube channel.
If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email Randy@mrlocksmith.com
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>For further information go to http://mrlocksmith.com/
One of my favorite books for making keys to motorcycles is the Guide to Motorcycles. The National Locksmith is selling it. Guide to Motorcycles, seven volumes. Get them all. Love it. It’s a great book.
Covering a wide range of service procedures, you’ll know everything a locksmith needs to know about each cycle. Plus, you’ll get step by step photographs and instructions. If you have ever been frustrated by cycles made by the following manufacturers:
– BMW
– Buell
– Harley-Davidson
– Honda
– Kawasaki
– Moto Guzzi
– Neiman
– Suzuki
– Triumph
– Yamaha
Please subscribe to my channel.
If you need an extra Car, Truck or Motorcycle key or a Motorcycle Locksmith call Randy at Mr. Locksmith Automotive (604) 259-7617 or email Randy@mrlocksmith.com
Motorcyclists in Canada have as much need of a good, reliable motorcycle locksmith as car owners. You’ve got a vehicle, a bike, that gets you from here to there, and sometimes it can’t do its job. Whether that’s because of a broken ignition key, lost keys, or damaged keys, a professional motorcycle locksmith can resolve your problem and get you back on the road. If you’re in need of excellent and professional motorcycle locksmith services, Mr. Locksmith Automotive is a top choice.
Whether you ride your motorcycle to work every day or just for fun at the weekend, a lost or broken key is bad news. Hopefully, you have a spare, but there’s no need to worry if you don’t. Mr. Locksmith Automotive can provide you with a working replacement in next to no time. All you need to do is call us. Our mobile motorcycle locksmith service offers motorcycle key duplication, even if you don’t have the original key to hand. We can utilize the manufacturer’s code to professionally craft a new key with our specialized equipment and computerized key code machines.
In addition to replacing lost or broken motorcycle keys, we also offer professional repair services for motorcycle locks. You need a heavy duty lock to protect your bike when you’re away from it. If you lose or break the key to that lock, we’ll take care of it.
Our comprehensive motorcycle locksmith Concord services include:
Our key and lock replacement service is suited to most makes and models of motorcycle, including: Harley-Davidson (we specialize in all Harley-Davidson Motorcycles, locks, keys and Fobs), Honda, Yamaha, Suzuki, Ducati and many more.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882r
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive: and Motorcycle Locksmith (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>For further information go to http://mrlocksmith.com/
My daily Auto Key Programmer is the HotWire and the MVP Pro. I am on the unlimited token plan for both programmers. For the past 5+ years, I have been purchasing and testing “Offshore Auto Key Programmers.”
I have several Off Shore MVP clones. The price was so low, we keep on testing to see if any Off Shore Key Programmer could replace our existing programmers.
The MVP Clones are poorly made and no consistency or reliability with the software.
One Off Shore Key Programmer clone will program Ford and Chrysler but not Honda. Another identical clone will do Honda but not some Fords.
Another clone may work on a Nissan, but no one unit will do everything. It’s just been a zero.
So we kept on buying these, kept on testing them. Our dongles would break. The units would break. They’d fall apart. The software was inconsistent.
However, we found one clone that consistently worked well with Honda reflashes, specifically the 1998-2002 Honda Preludes.
In the early day we were just trying to save tokens, and really did we save any money? No, the clones were not good. There’s no consistency.
But again, if you don’t try, you don’t know. And there are some good units out there that the Chinese are coming out with now that are making some of the good stuff look bad.
Some of the new offshore auto key programmers they are using their own software, their own designs, and they are not clones or scammer units. Some of the Off Shore Key Programmers actually seem to be getting there.
Well, they’re coming out with nice updates on them, so they are becoming consistent.
The thing is with everything, you could have an Offshore made, really good programmer, and now they have counterfeit units of that that are total garbage.
So why are some of these Auto Key Programmers $300 and the other unit’s $50? The $50 unit is a total clone and it’s a total piece of garbage. How do you know? You don’t. That’s the big problem.
One way to find out is if you read the automotive forums.
Talk to other Locksmiths and view our videos.
The various plugins quality was all over the map. Some very good forums on Facebook, KeyPro website, ClearStar, etc.
So far, again, we’ve talked about this before, our go-to units are the MVP Pro and Hotwire.
Subscribe to my channel.
If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email Randy@mrlocksmith.com
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>
For further information go to http://mrlocksmith.com/
Mr. Locksmith Automotive is reviewing the Hot Wire Automotive Key Programmer. I absolutely love this product. It was one of the first programmers I bought. We use two major Automotive Key Programmer, the MVP Pro and we the Hot Wire.
Hot Wire is it is PC based. It goes through a box and it plugs into the OBDC unit. It’s the most idiot-proof key programmer you can find out there.
The interface is so simple you don’t even need to read the manual. All you do is pick out your year, make, and model and plug it in. Turn the key to run and hit enter. The interface is unbelievably good. I absolutely love this. For beginners or advanced automotive locksmiths.
The MVP Pro is the bleeding edge and can do more autos. However, the Hot Wire is easier, quicker to use but again we had the other day where the MVP Pro wouldn’t program a vehicle, the Hot Wire did it.
In the past, I had two Mustangs side by side, same year, same model. The Hot Wire would program one but wouldn’t program the other. The MVP Pro would program the other unit but wouldn’t program the one that the Hot Wire would do. That’s a constant battle with cars. It happens.
We are making keys to cars every single day. This is what we find and we can’t do without two programmers. Nobody can.
That is why we keep on trying some of the offshore versions just to see how they go. We’re always evaluating them.
Again, if you are starting out and you’re coming into a good standard unit, this is the way to go. It’s simple, it’s easy, it’s to the point, and you can’t make a mistake. You really cannot make a mistake.
I love the tablet-based Hot Wire because it’s all in one unit.
We are subscription based on one of our Hot Wires and one we have purchased the software for the most popular autos.
No matter what anybody says, we haven’t found one key programmer that does everything.
If the manufacturer’s want to disagree, I’m waiting for that holy grail. That one machine.
Our service vehicles are equipped with advanced tools and computers that allow us to open your car locks without causing any damage at all. We also have state of the art, computerized machines that we can use to manufacture new keys or replace the old ignition in your car.
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>