For further information go to Mr. Locksmith
Let us talk about three of the must have tools you have to have for your locksmith kit. Every one locksmith must have these three tools: Megapro set, Hex set, and the Tamperproof kit.
The Megapro set
The Megapro set – this is the original and inside it it has the flatheads, the Robinsons, the Phillips and some torques. That is absolutely fantastic. It’s a go-to tool. It’s always there, it’s got the tools.
The next one on my kit – the Hex set.
The Hex set
The Hex set – It’s got all the basic or the most popular sizes in it. You have to have this screwdriver if you’re a locksmith because so many times you’ve misplaced your Allen keys. This is, a must have, fantastic tool. Especially we’re getting a lot of European made locks out there. you still need complete Allen key sets, but you can just grab this and 90% of the time, if not more, this will do the trick.
The other one is the Tamperproof kit.
The Tamperproof set
Tamperproof kit – This is the MegaPro. What it is, it’s for taking out the tamper-proof screws. It’s got all the most popular tamperproofs and torques an dthe flatheads with the holes inside. It is really, really cool.
So these are the three must have tools for everybody. You gotta have these in your locksmith kit. The original MegaPro, it’s got the most popular screws you’re going to run across every single day. The Hex, because you’re running across a lot of these in locks now, more and more all the time, this will probably, used 90% of the time, you’ll still need an Allen key set but it does the trick. And the Tamperproof. This will do for taking out those one way screws that are flatheads and it’s got the special bit for taking out the one way flatheads. It’s got the hex with the hole in it and the torques with the hole in it. Must have tools for the locksmith. For a beginner or a pro, this is a lifesaver. Have a good day. I hope you enjoyed watching this video.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities
]]>
For further information go to Mr. Locksmith
Unboxing Lock Tech GM Ignition Removal Tools
So we have a new “toy”, from LockTech. Instead of an unboxing, we will call it an “unbagging”. It’s a full set from AccuReader LockTech. And this is the ignition removal tools. A onewhole set, is all four of them. Rather than buy one at a time, just buy the whole thing. It would save you some money. And again, this is an unbagging, not unboxing. It has never been opened, and it will be the first time of us “playing” with it. We’ve been using AccuReader LockTech’s tools for years, so it is the first time getting like the whole little set here.
So get that there. It is a total unbagging. They’re easy to tell apart which is kinda cool. So we’ve got a blue side, a yellow side, a green one with a toy. So we got the whole set here of four. Most of their products, by the way are extremely well made. So it does the trick. And we’ll show this in action, this is just an unbagging today, we’ll show it in action down the road.
These four different tools, they call it the V1, V2, V3, V4. And this’ll take out the ignitions on a whole lot of cars like the Chevrolet Cruzes, Chevrolet Colorado, Silverado, the Alero. It is an interesting tool for me. It’s removing the ignition cylinders from GM vehicles without drilling or damaging which is very cool. We’ve had their other products even before. Some of these are earlier ones, but they’re as fantastic. Instructions comes with the bag.
All four (4) of GM Ignition Removal Tools Set
We’ll post some videos of us playing with this. So I hope that helps a little bit. We will play with some ignitions later, but right now this is just an unbagging of a brand new “toy” from AccuReader LockTech for us. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my nondestructive methods of entry.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities
]]>Certificate in Institutional Locksmithing On-Line Series
Regular price: $1995.00
12 – 24 Months Institutional On-Line Locksmithing Class which is designed to teach engineering or maintenance employees for large facilities (School, Hospital, Corrections, etc.).
Complete Series: Includes all Introduction to On-Line Locksmith Training and an added Bonus the Consumer Safe Series (Sentry Safes, First Alert Safes, Hotel Safes, etc.) and Institutional Safes.
ORDER NOW
OUR ONLINE INSTITUTIONAL LOCKSMITH TRAINING COVERS THE FOLLOWING TOPICS
- Rekeying Locks
- Lock Down Procedures
- Active Shooter
- Lock Hardware for Active Shooter
- Master-keying
- Key Control
- Institutional Software for Key and Lock Control
- High Security Locks
- Emergency Lock Down Procedures
- Emergency Lock Down Locks and Doors
- Servicing Panic Hardware
- Institutional Locksmith Training
- Active Shooter
- And More…
ORDER NOW
Institutional Locksmith Hands-on Class On-Site at Your Facility
I offer a 1-4 Day Institutional Locksmithing Class which is designed to teach engineering or maintenance employees for large facilities (School, Hospital, Corrections, Policing, etc.). The 4 Day Institutional Locksmithing Class is available onsite with a minimum of four (4) students. Call or e-mail to arrange a class or for next course dates.
Mr. Locksmith Hands-On Locksmith Training in Las Vegas!
Mr. Locksmith Hands-on Locksmith Training in Las Vegas
For further info go to Mr. Locksmith Training.
Real hands-on locksmithing class designed to teach engineering or maintenance employees for small or large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners to help you become a locksmith, In-House Institutional Locksmith or start your own locksmith business.
Upcoming Classes in LAS VEGAS, NEVADA
- September 17-20, 2018 – Sign up here
- October 22-25, 2018 – Sign up here
- November 12-15, 2018 – Sign up here
Mr Locksmith Training Las Vegas
In this training you will:
- Cut and duplicate keys on code key machines and key duplicator machines.
- Rekey locks
- Shim
- Trouble shoot
- Pick locks
- Take apart (and put back together) locks (deadbolts and key in knobs).
- Lock-outs, broken keys and picking locks.
- Design a mini Master key system and master key their locks.
- Rekey Deadbolt
- Rekey Key in Knobs
- Shiming a lock
- Locksmith Training
- Picking a lock
- Opening a lock with no keys
- Single pin picking, Feel Method, French Method
- Raking, Jiggling, Bumping, Scrubbing
- Can you lock even be picked?
- High Security Locks
- Tubular, Ace, etc.
- Lock has malfunctioned.
- Reading
- Buying Picks
- Making Picks
- Electronic Picks
- Pick Guns
- Methods of Entry
- Legal Issues
- Tactics
- Tools
- Preparation for Entry
- Setup your own Lock Practice Boards
- Automotive Lock Picking
- Other Lock Bypass Methods
- DAME (Defense Against Methods of Entry)
- And lots more!
The Mr. Locksmith Hands-On Locksmithing Course includes all supplies, lock picks, tools and material needed to take the course with.
This class is only $1,500.00.
Terry Whin-Yates is a 3rd Generation Locksmith with over 30+ years of locksmithing experience and a BA (Hons) in Criminology. I will teach you how to rekey and pick locks like a Professional Locksmith. This is a Hands-On Locksmith Class covering basic to advanced Lock Picking Methods and Techniques. Learning how to pick open locks starts with learning the basic to advanced methods of lock picking. The locksmith student will learn the various methods of picking open a lock. I have been teaching locksmith, military and police for over 30 years how to pick open deadbolts, key-in-knob, padlocks, filing cabinets and “pick resistant” and “pick proof” locks. The lock picking class will cover the basic methods are as “Rake,” “Feel” and “Rake and Feel” lock picking methods to advanced lock picking techniques to open locks with mushroom, spool and spiral pins.
All Lock Picking Students will get access to my five (5) online video on Picking Locks, Using Plug Spinners, etc. and my new book. FREE for all students! As an added bonus you will get a copy of my new book “Penetration Expert:”How to be a Professional Lock Picker” for FREE and access to Five (5) or my Private On-line Lock Picking Videos. Important Note: All students must pass a Criminal Records Check / Security Clearance from your local Police Force.
All past students will also receive a special bonus! I’ll also throw in a Lab Smart Wedge Universal Pin Kit (.003) a $200 value!
In addition, if you want to purchase lock picks and join the “Penetration Expert: Locksmiths Always Get In” Lock Picking Club you must pass a Criminal Records Check / Security Clearance.
Upcoming Classes in LAS VEGAS, NEVADA
- September 17-20, 2018 – Sign up here
- October 22-25, 2018 – Sign up here
- November 12-15, 2018 – Sign up here
See you in Las Vegas!
“If I’d only known, I would have been a locksmith.” Albert Einstein
Visit my website for On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to http://mrlocksmithtraining.com/
Terry Whin-Yates BA (Hons) Criminology, 3rd Generation Locksmith, 35+ Years Locksmith email: terry@mrlocksmith.com
Terry Whin-Yates is the Founder CEO & President of Mr. Locksmith and Mr. ProLock.
]]>