For further information go to Mr. Locksmith

Unboxing Lock Tech GM Ignition Removal Tools

So we have a new “toy”, from LockTech. Instead of an unboxing, we will call it an “unbagging”. It’s a full set from AccuReader LockTech. And this is the ignition removal tools. A onewhole set, is all four of them. Rather than buy one at a time, just buy the whole thing. It would save you some money. And again, this is an unbagging, not unboxing. It has never been opened, and it will be the first time of us “playing” with it. We’ve been using AccuReader LockTech’s tools for years, so it is the first time getting like the whole little set here.

So get that there. It is a total unbagging. They’re easy to tell apart which is kinda cool. So we’ve got a blue side, a yellow side, a green one with a toy. So we got the whole set here of four. Most of their products,  by the way are extremely well made. So it does the trick. And we’ll show this in action, this is just an unbagging today, we’ll show it in action down the road.

These four different tools, they call it the V1, V2, V3, V4. And this’ll take out the ignitions on a whole lot of cars like the Chevrolet Cruzes, Chevrolet Colorado, Silverado, the Alero. It is an interesting tool for me. It’s removing the ignition cylinders from GM vehicles without drilling or damaging which is very cool. We’ve had their other products even before. Some of these are earlier ones, but they’re as fantastic. Instructions comes with the bag.

All four (4) of GM Ignition Removal Tools Set

We’ll post some videos of us playing with this. So I hope that helps a little bit. We will play with some ignitions later, but right now this is just an unbagging of a brand new “toy” from AccuReader LockTech for us. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my nondestructive methods of entry.

Mr. Locksmith Vancouver

Vancouver Locksmith Main: (604) 239-0882

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities

For further information go to Mr. Locksmith Automotive

Changing Ford Remote Battery

This is a very popular Ford key and we call it the “eight cut“. It’s a four button, remote head key. If it’s tons of the Mustangs, or if it’s the whole Ford line, it is all over the place. It’s very popular.  There is no screws on this one. If there is a ring, just get the ring out of the way. To remove the battery, put the quarter, or a flathead in and then just give it a little twist. It will come apart very easily. It’s got weather stripped. And then just flip out the battery. So this one is the CR2032,  which is an extremely popular battery.

To put the battery in, you just gotta slide it in and that’s perfect. So we’ve done a very good weather stripping on this. So there we go. There is our Toyota remote.

Mr. Locksmith CR2032

Steps on how to change a Toyota remote battery:

• First, see if it had the ring on. If so, just take the ring off.
• Use your Leatherman or flathead screwdriver. There are no screws. You can tell by looking at the fob.
• Just give it a little twist (make sure you don’t take much force).
• And make sure to do it without everything falling every which way.

I like the Energizers and the Duracells for Ford remote battery. I don’t like the dollar store ones, that always seems to be giving people problems. And I don’t like the inexpensive ones. Fits in quite nicely. Nothing else comes apart here. Just slip it in there. Now we gotta get this weather stripping on. Just clip it in there nicely. We can put the ring back on. It goes on pretty quick and easy. Again, it’s an extremely popular remote. A four button, Ford remote head key which we call the “eight cut“. Again. very easy to do. I hope you enjoyed watching this video. Subscribe to my channel.

Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non destructive methods of entry.

Mr. Locksmith Vancouver

Vancouver Locksmith Main: (604) 239-0882

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/