Day-in and day-out, we hear horror stories from our customers who almost got scammed by a scammer locksmith. Unfortunately, many times, people fall for the scams of these criminals.

Today, a very smart Calgary accountant did what we suggest everyone to do, think and refuse to pay. Mariya Savchyshyn owns a condo in Calgary and rents it out. She said her tenants asked her to replace their lock, and a Google search listed Locksmith Calgary at the top, so she called them without doing her searches to see that they are a scammer locksmith.

Finding out if a locksmith company is a scam is quite easy, here are a few simple steps from Terry Whin-Yates to catch them.

Tips from Terry Whin-Yates on spotting a locksmith scammer

1. Do they provide unbelievably cheap pricing? The $29, $19, $39 dollar locksmith ads are a scam.
2. Do they operate under different business names? Scammer locksmiths often run under different business names to shield their identity.
3. Is their Google Maps location legitimate? Many locksmith scammers have their Google Maps locations out of gas stations, Starbucks locations, restaurants, or even a middle of a forest (we’ve seen it all). Pull up their location on Google street view and see where their address is, if it’s another business, it’s a fake. If it’s a house, it’s a scam. For example, the Locksmith Calgary scammer presents their address as 724 80 Ave SW, Calgary AB.  This is a fake location.
   

   Locksmith Calgary Scammer at 724 80 Ave SW

4. Are they licensed? In British Columbia for example, you can check if a locksmith company is licensed or not by inputting their security license number into the following page – Security Licence Status Verification.
5. Check their phone number! Copy their phone number into Google, does it appear in locations like Toronto and other provinces or states where the locksmith shouldn’t be? It’s a fake.
6. Ask for the name of the business owner and a link to his or her biography, if the company is hesitant to provide the information of the owner of the company, stay away.
7. Ask for ID and documentation. Do not let them start work without the company showing their security license, drivers license, insurance, and city business license. If they say “I don’t have it” or “I can send it to you later” or if it looks fake, refuse them doing the work, refuse to pay and send them away.
8. If the locksmith gets aggressive or pushy with their tactics or if at any time you feel uneasy or uncomfortable, dial 911 immediately.
9. Do they have a reputation? If you can’t find anything about them online such as a social media following or a clean track record, do not let them work on your property as they are most likely a locksmith scammer. Reputable locksmiths and locksmith business owners like Terry Whin-Yates, the owner of Mr. Locksmith and Mr. ProLock have a clean track record.
10. Do they show up in an unmarked vehicle, or does their vehicle simply say “locksmith service” ? They are most likely a scam, do not allow them entry or to do any work on your property.
11. Do they refuse to provide an invoice on the spot? Are there inflated or hidden charges? Refuse to pay and if they get aggressive, dial 911.
12. Do they have a GST number on the invoice? Check if it’s legitimate here.
13. Do they list their locksmiths on their website like on a team page with their name and pictures like we do with locksmith Vancouver? If not, you have to wonder why and what they’re hiding.

There are many more warning signs to catch a scammer locksmith. Just use your head and if you can’t determine if they’re fake or not, don’t use them!

One big warning sign which Mariya Savchyshyn should have caught onto was the fact that the scammer locksmith, Locksmith Calgary used the tenant’s phone to phone her. Why wouldn’t they use their own cell number? Because these scammer locksmith’s do not want repeat customers.

Scammer locksmiths such as locksmith Calgary operate on a one-hit basis. They scam you, and then they request an extreme amount of money and force you to pay. Because of the bad experience they provide, they don’t expect you to call back which is why they provide an illegitimate invoice with a fraudulent tax ID, a fake address and at often times as well, a fake phone number.

Thankfully, when the scammer locksmith called Mariya Savchyshyn to say that he’s done, she caught on. Locksmith Calgary refused to provide an itemized invoice for the inflated invoice which was triple the cost, $773.85 as per CBC.

“And I’m like, that’s weird, because usually the customer has to receive an invoice, look at it and then pay, right?” said Savchyshyn.

“I’m an accountant myself, and I know that no one is going to send me money until they see the invoice.”

When Savchyshyn refused to pay without knowing exactly what she was paying for — she says the company threatened to send the bill to a collection agency.

Terry Whin-Yates states that threats are common with scammer locksmiths. We’ve heard from people that the scammer locksmiths have gotten violent with violent threats, verbal threats, death threats and unfortunately much more.

“I just want to warn people because someone … might be scared because that company is scaring people by saying they’ll send them to collections,” she said.

“They might be scared and just pay $800 for a lock, it’s ridiculous.”

A scammer locksmith will have a hard time sending you to a legitimate collections agency. Collection agencies are not stupid, they will ask for supporting documentation which the scammer locksmiths will not have. Do not be fooled by the collection agency trick. If they do send you to collections, you can fight it by signing up to a low-cost service called LegalShield.

Company says invoices issued after payment

“Locksmith Calgary told CBC Calgary they don’t provide a billing service, even for larger companies, and require all payments be made before an invoice is issued.”

This should be an immediate red flag. No legitimate company issues an invoice after payment. We, for example always issue an itemized invoice before the customer pays, because that’s the correct way of doing business. If a customer has a question, we’re always there to answer that question.

It is ok to ask the locksmith who their credit card processor is for collecting payments. Credit card processors are the companies that collect your payment on behalf of the merchant and then provide the merchant with the funds. Names of some credit card processors are: Moneris, Square, Payfirma, Helcim, Stripe. If the locksmith doesn’t know or refuses to answer the question, refuse to pay. If they demand cash, refuse to pay.

“On their website, Locksmith Calgary lists their service call fee as $15 plus labour and hardware costs. A lock change is listed as $35 dollars and a lock re-key as $19.”

For further info go to Mr. Locksmith Training.

Real hands-on locksmithing class designed to teach engineering or maintenance employees for small or large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners to help you become a locksmith, In-House Institutional Locksmith or start your own locksmith business.

Upcoming Classes in LAS VEGAS, NEVADA

• September 17-20, 2018  – Sign up here 
• October 22-25, 2018  – Sign up here
• November 12-15, 2018 – Sign up here

Mr Locksmith Training Las Vegas

In this training you will:

• Cut and duplicate keys on code key machines and key duplicator machines.
• Rekey locks
• Shim
• Trouble shoot
• Pick locks
• Take apart (and put back together) locks (deadbolts and key in knobs).
• Lock-outs, broken keys and picking locks.
• Design a mini Master key system and master key their locks.
• Rekey Deadbolt
• Rekey Key in Knobs
• Shiming a lock
• Locksmith Training
• Picking a lock
• Opening a lock with no keys
• Single pin picking, Feel Method, French Method
• Raking, Jiggling, Bumping, Scrubbing
• Can you lock even be picked?
• High Security Locks
• Tubular, Ace, etc.
• Lock has malfunctioned.
• Reading
• Buying Picks
• Making Picks
• Electronic Picks
• Pick Guns
• Methods of Entry
• Legal Issues
• Tactics
• Tools
• Preparation for Entry
• Setup your own Lock Practice Boards
• Automotive Lock Picking
• Other Lock Bypass Methods
• DAME (Defense Against Methods of Entry)
• And lots more!

The Mr. Locksmith Hands-On Locksmithing Course includes all supplies, lock picks, tools and material needed to take the course with.

This class is only $1,500.00.

Terry Whin-Yates is a 3rd Generation Locksmith with over 30+ years of locksmithing experience and a BA (Hons) in Criminology. I will teach you how to rekey and pick locks like a Professional Locksmith. This is a Hands-On Locksmith Class covering basic to advanced Lock Picking Methods and Techniques. Learning how to pick open locks starts with learning the basic to advanced methods of lock picking. The locksmith student will learn the various methods of picking open a lock. I have been teaching locksmith, military and police for over 30 years how to pick open deadbolts, key-in-knob, padlocks, filing cabinets and “pick resistant” and “pick proof” locks. The lock picking class will cover the basic methods are as “Rake,” “Feel” and “Rake and Feel” lock picking methods to advanced lock picking techniques to open locks with mushroom, spool and spiral pins.

All Lock Picking Students will get access to my five (5) online video on Picking Locks, Using Plug Spinners, etc. and my new book. FREE for all students! As an added bonus you will get a copy of my new book “Penetration Expert:”How to be a Professional Lock Picker” for FREE and access to Five (5) or my Private On-line Lock Picking Videos. Important Note: All students must pass a Criminal Records Check / Security Clearance from your local Police Force.

All past students will also receive a special bonus! I’ll also throw in a Lab Smart Wedge Universal Pin Kit (.003) a $200 value!

In addition, if you want to purchase lock picks and join the “Penetration Expert: Locksmiths Always Get In” Lock Picking Club you must pass a Criminal Records Check / Security Clearance.

Upcoming Classes in LAS VEGAS, NEVADA

• September 17-20, 2018  – Sign up here 
• October 22-25, 2018  – Sign up here
• November 12-15, 2018 – Sign up here

See you in Las Vegas!

“If I’d only known, I would have been a locksmith.” Albert Einstein

Visit my website for On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to http://mrlocksmithtraining.com/

Terry Whin-Yates BA (Hons) Criminology, 3rd Generation Locksmith, 35+ Years Locksmith email: terry@mrlocksmith.com

For further information go to Mr. Locksmith Automotive

Changing Ford Remote Battery

This is a very popular Ford key and we call it the “eight cut“. It’s a four button, remote head key. If it’s tons of the Mustangs, or if it’s the whole Ford line, it is all over the place. It’s very popular.  There is no screws on this one. If there is a ring, just get the ring out of the way. To remove the battery, put the quarter, or a flathead in and then just give it a little twist. It will come apart very easily. It’s got weather stripped. And then just flip out the battery. So this one is the CR2032,  which is an extremely popular battery.

To put the battery in, you just gotta slide it in and that’s perfect. So we’ve done a very good weather stripping on this. So there we go. There is our Toyota remote.

Mr. Locksmith CR2032

Steps on how to change a Toyota remote battery:

• First, see if it had the ring on. If so, just take the ring off.
• Use your Leatherman or flathead screwdriver. There are no screws. You can tell by looking at the fob.
• Just give it a little twist (make sure you don’t take much force).
• And make sure to do it without everything falling every which way.

I like the Energizers and the Duracells for Ford remote battery. I don’t like the dollar store ones, that always seems to be giving people problems. And I don’t like the inexpensive ones. Fits in quite nicely. Nothing else comes apart here. Just slip it in there. Now we gotta get this weather stripping on. Just clip it in there nicely. We can put the ring back on. It goes on pretty quick and easy. Again, it’s an extremely popular remote. A four button, Ford remote head key which we call the “eight cut“. Again. very easy to do. I hope you enjoyed watching this video. Subscribe to my channel.

Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non destructive methods of entry.

Mr. Locksmith Vancouver

Vancouver Locksmith Main: (604) 239-0882

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

For further information go to http://mrlocksmith.com/

Changing Toyota Remote Battery

This is a three-button Toyota remote. Very, very simple. Just lock, unlock and it’s got the panic button on the inside, which I didn’t see at first. This one’s for the older Toyotas. When you look at it, there’s no screws, there’s no screws anywhere on it. It’s pretty much sealed except for at the back, you can see. Not a dime would fit in that, so we use a little flat-head screwdrivers. I’m gonna use my Leatherman. But, you just can’t twist it out. You gotta slide it out because it’s got the little tabs over it. It has an extremely popular battery. The battery is a CR2032. Popular for a lot of different remotes, remote-head keys and proxes.

To put the battery in, you just gotta slide it in and that’s perfect. So we’ve done a very good weather stripping on this. So there we go. There is our Toyota remote.

Mr. Locksmith CR2032

Steps on how to change a Toyota remote battery:

• First, see if it had the ring on. If so, just take the ring off.
• Use your Leatherman or flathead screwdriver. There’s no screws. You can tell by looking at it.
• Just give it a little twist (make sure you don’t take much force).
• And make sure to do it without everything falling every which way.

There we go. That’s a nice one. Just make sure that you didn’t spill everything when you twist it. Again, we have to slide this battery out. Don’t twist and pull. We’ve got little metal tabs over the battery. Just slide it out, and it comes out nicely. The CR2032, is an extremely popular for Toyota remote battery. And, I mostly just use Energizers or Duracell batteries. I don’t like the dollar store stuff that much as I prefer the better quality. The dollar store doesn’t usually sell Duracells, or Energizers. I usually find Walmart has the cheapest, the least expensive parts. If you lose track of which way it goes because there’s no positive or negative, few tips – The little contacts always go to the opposite to the plus (or the writing). Just slide the battery back in. Slide it in nicely. And then just clip it together. On the video, it came apart a lot nicer the second time around. I hope you enjoyed watching this video. Subscribe to my channel.

Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith Vancouver

Vancouver Locksmith Main: (604) 239-0882

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

For further information go to www.mrlocksmith.com

The customer was broken into in East Vancouver. The burglars just kicked the door in. Very common Break and Enter in Vancouver. You can see the door was broken and the cheap Off-Shore deadbolt just failed. Unfortunately, too many of these inexpensive deadbolts ($10-$45) are installed in Vancouver, sometimes on new condos and new buildings.

Mr. Locksmith Vancouver Hastings B&E Broken Door

Mr. Locksmith Vancouver Hastings B&E Broken Lock

Mr. Locksmith Vancouver Hastings Vancouver Special

Mike from Mr. Locksmith Vancouver rather than replace the door he installed a Mag Plate / Door Reinforcer (doubles the strength of the door) and a new Schlage Deadbolt (B660) with the Commerical Grade C123 Key and Cylinder. The Schlage Deadbolt is one of our favorite deadbolts.

We call this our Vancouver Special. The door frame did not need a 18″ Strike Plate installed on the door frame because it was metal.

Hastings East Pender and Commercial BnE repair

Call Mr. Locksmith for further information http://www.mrlocksmith.com/

or email: info@mrlocksmith.com

Mr. Locksmith Vancouver

Vancouver Locksmith Main: (604) 239-0882

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

For further information go to Mr. Locksmith.

My Favorite and what I consider the Best Deadbolts for Residential and Commerical Doors are as follows:

1. Abloy High-Security Deadbolt Protec 2
2. Schlage Primus High-Security Deadbolt
3. Schlage Commercial Grade B660 Deadbolt with C123 or S123 Keyway

Abloy Deadbolt Vancouver Special front view with Door Reinforcer

Abloy Deadbolt front view

Abloy Deadbolt Vancouver Special front view with Door Reinforcer

18″ Strike Plate with 3″ screws to secure the plate to the frame and studs to prevent kick-ins.

Abloy High-Security Protec 2 Deadbolt:

• Pick Resistant if not Pick Proof.
• No known Picking Bypass techniques that do not leave a sign of tampering or entry.
• Drill resistant. Hardened steel as well as offering thick anti-drill plates. The face of the deadbolt has the best Hardened steel to deter drilling of any deadbolt on the market today.
• Patented Key Control (Only Professional and Factory Approved LocksmithDealer have Keys for duplication and then only with Owner Approval)

Schlage Primus High-Security Deadbolt:

• UL Rated Pick Resistance
• Patented Key Control (Only Professional and Factory Approved Locksmiths have Keys for duplication and then only with Owner Approval)
• Drill Resistance
• One of the most durable and popular deadbolts installed on Hospitals, Schools, Commerical and Residential buildings.
• After the Abloy Protec 2, Terry Whin-Yates Favorite High-Security Deadbolt.

Schlage Commercial Grade B660 Deadbolt with C123 or S123 Keyway:

• Patented Key Control
• One of the most durable and popular deadbolts installed on Hospitals, Schools, Commerical and Residential buildings.
• Terry Whin-Yates Favorite Deadbolt for customers not wanting a High-Security Deadbolt or Key Control.
• A difficult lock for even an experienced locksmith to pick open.

Mr. Locksmith Schlage B660 Mag Plate

Medeco Deadbolts deserve to be on the list but I still prefer the Top 3 Recommended for durability, availability of parts and I just plain like them. I have been installing these deadbolts since I was an apprentice.

The Deadbolts need help to withstand brute force attacks and kicking the door in. The following items are needed:

1. Mag Plate or Door Reinforcer. Strengthens the door.
2. 1*’ Strike installed on the door frame with 3″ screws screwed into the door frame and stud.
3. Longer screws installed in the hinges.
4. Bolt Buddy (Optional).
5. Astral or Full-Length Plate (out swinging doors).

Abloy Deadbolt Vancouver Special with Door Reinforcer

The following video shows a Schlage B660 deadbolt, Mag Plate and Door Strike installed.

Call Mr. Locksmith for further information http://www.mrlocksmith.com/

or email: info@mrlocksmith.com

Mr. Locksmith Vancouver

Vancouver Locksmith Main: (604) 239-0882

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Mr. Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

For further information go to http://mrlocksmith.com/

Today, we are going to play with a 2017 Ford Fusion Energi. This thing is a hybrid. It uses a prox key. Also, it has a key override on the door, but I don’t think on the ignition. We’ll find out. We’ll go through everything, and we’ll play with it. We’re gonna show you how to open it. So just the traditional long reach tool. Now if you hit the electric lock, it’s not going to open on this model, so we just pull the door handle. And I always have the customer stand on the driver’s side. I always open up the car from the passenger side. Have the owner stand on the driver’s window. Have him look through it and have him help you. This just keeps him out of your hair so you can open up the car. Hitting the electric locks, not going to help. You have to pull the handle. And boom, off she goes. So pretty easy opening. If the car is dead and you can’t open it, you scan till pull out the physical key. Just gotta, you gotta depress, push it in, depresses. There we go. And then it just pulls off. So you have to put the key in properly. Put it on the top. 2017 Ford Fusion Energi, it’s a hybrid. Normal prox, easy to program in the proxes on the MVP. If you wanna cut the key, it’s an eight cut high security. We didn’t have a Lishi pick for it. We’re gonna get one if we have to pick it open. Again, very, very easy car to open. Just a simple long reach tool, but don’t hit the electric locks. Hit the handle, pull the handle to release it. And again, the key to get in if everything’s dead on the car, if you have this set, your customer has a set, they can pull out the key and physically open it up, remove the cap. Okay, so I hope that helps a little bit.

– Prox with Ford 8 cut High-Security key. Easy to add a key with the MVP Pro.

– Easy to open with a “Long Reach Tool” and Air Bags but you have to pull the handle to open.

– Key over-ride on the drivers’ door hidden in the handle.

Call Mr. Locksmith for further information http://www.mrlocksmith.com/

or email: info@mrlocksmith.com

Mr. Locksmith Vancouver

Vancouver Locksmith Main: (604) 239-0882

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

For further information go to Mr. Locksmith Training.

In British Columbia (BC) to become a locksmith consists of two Government Agencies, the Industry Training Authority and the Ministry of Public Safety & Solicitor general, Security Programs Division.

The two Agencies have defined a person working in the Locksmith industry as follows:

“Locksmith” means a person who repairs, services and/or installs all types of keys, locks, access/egress control systems (mechanical or electrical) and builders of hardware in accordance with the provisions the Ministry of Public Safety & Solicitor general, Security Programs Division, Policing & Community Safety Branch, Private Investigators and Security Agencies Act.
http://www2.gov.bc.ca/gov/content/employment-business/business/security-services/security-industry-licensing

The Apprentice locksmith would register with the ITA as an Apprentice Locksmith.

http://www.itabc.ca/program/locksmith

Also, the Apprentice Locksmith would apply for their BC Government Employee License as a “Locksmith Under Supervision” with BC Security Industry Licensing.

Further information can be found online at http://www2.gov.bc.ca/gov/content/employment-business/business/security-services/security-industry-licensing/online-applications

Mr. Locksmith Pick Set

In conclusion, in the Province of British Columbia, an Apprentice Locksmith must work two (2) years under the supervision of a Licenced Locksmith. Also, the Apprentice Locksmith must qualify and write the ITA Locksmith exam. The Locksmith Exam usually has 200 multi-choice questions. When the Apprentice Locksmith passess the ITA Locksmith exam they would be issued a Trade Qualification (TQ) as a Locksmith. The BC Locksmith TQ is recognized across Canada.

Abloy Deadbolt Vancouver Special front view with Door Reinforcer

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Mr. Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

For further information go to http://mrlocksmith.com/

Wishing everyone a Happy Thanksgiving.

At this time of Thanksgiving celebration, our thoughts turn gratefully to you with warm appreciation.

Our best wishes for a Happy Thanksgiving!

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

We cover every corner of Vancouver with locksmith services. If you have an issue with your locks or keys, don’t wait any longer and call Mr. Locksmith Vancouver or book your appointment online now.

Mr. Locksmith.

Mr. Locksmith Licencing Opportunities

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Mr. Locksmith Happy Thanksgiving

UPDATE 1: After only less than 10 keys cut in the shop the machine is not functioning! The Manufacturer is sending a new Motherboard and Tablet and a video on “How to Replace the Motherboard.”

UPDATE 2: 3 Weeks now and we have the new Motherboad and Tablet took 4 hrs to install. Still major problems and talking with the manufacturer in China. New Video soon showing the problems.

I will post an update when we get the replacement parts. Also, the Manufacturer stated the Engraving function will not be supported with the new Motherboard. So what do I do with the Engraving clamp?

SEC-E9 automatic key cutting machine 8 tablet PC with Automobile Key Clamp, Cutter, Decoder and Parts $2495.00 US

LIMITED TIME OFFER FREE SHIPPING TO CANADA AND USA

Single side Clamp for Domestic Keys $200.00 US

Dimple Key Clamp $350.00 US

Tubular / Ace Key Clamp $250.00 US

Tibble key Clamp $150.00 US

LDV(F019) Clamp $150.00 US

HU64 Clamp $95.00 US

TOY2 Clamp $95.00 US

 VA2 Clamp $95.00 US

Engraver Clamp $350 US

* Note: SEC E9 Videos removed until we get the Code Machine Fixed

Mr. Locksmith SEC E9 Code Machine North Amercia Model

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/