For further information go to Mr. Locksmith
Let us talk about three of the must have tools you have to have for your locksmith kit. Every one locksmith must have these three tools: Megapro set, Hex set, and the Tamperproof kit.
The Megapro set
The Megapro set – this is the original and inside it it has the flatheads, the Robinsons, the Phillips and some torques. That is absolutely fantastic. It’s a go-to tool. It’s always there, it’s got the tools.
The next one on my kit – the Hex set.
The Hex set
The Hex set – It’s got all the basic or the most popular sizes in it. You have to have this screwdriver if you’re a locksmith because so many times you’ve misplaced your Allen keys. This is, a must have, fantastic tool. Especially we’re getting a lot of European made locks out there. you still need complete Allen key sets, but you can just grab this and 90% of the time, if not more, this will do the trick.
The other one is the Tamperproof kit.
The Tamperproof set
Tamperproof kit – This is the MegaPro. What it is, it’s for taking out the tamper-proof screws. It’s got all the most popular tamperproofs and torques an dthe flatheads with the holes inside. It is really, really cool.
So these are the three must have tools for everybody. You gotta have these in your locksmith kit. The original MegaPro, it’s got the most popular screws you’re going to run across every single day. The Hex, because you’re running across a lot of these in locks now, more and more all the time, this will probably, used 90% of the time, you’ll still need an Allen key set but it does the trick. And the Tamperproof. This will do for taking out those one way screws that are flatheads and it’s got the special bit for taking out the one way flatheads. It’s got the hex with the hole in it and the torques with the hole in it. Must have tools for the locksmith. For a beginner or a pro, this is a lifesaver. Have a good day. I hope you enjoyed watching this video.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities
]]>
For further information go to Mr. Locksmith Automotive
Changing Ford Remote Battery
This is a very popular Ford key and we call it the “eight cut“. It’s a four button, remote head key. If it’s tons of the Mustangs, or if it’s the whole Ford line, it is all over the place. It’s very popular. There is no screws on this one. If there is a ring, just get the ring out of the way. To remove the battery, put the quarter, or a flathead in and then just give it a little twist. It will come apart very easily. It’s got weather stripped. And then just flip out the battery. So this one is the CR2032, which is an extremely popular battery.
To put the battery in, you just gotta slide it in and that’s perfect. So we’ve done a very good weather stripping on this. So there we go. There is our Toyota remote.
Mr. Locksmith CR2032
Steps on how to change a Toyota remote battery:
- First, see if it had the ring on. If so, just take the ring off.
- Use your Leatherman or flathead screwdriver. There are no screws. You can tell by looking at the fob.
- Just give it a little twist (make sure you don’t take much force).
- And make sure to do it without everything falling every which way.
I like the Energizers and the Duracells for Ford remote battery. I don’t like the dollar store ones, that always seems to be giving people problems. And I don’t like the inexpensive ones. Fits in quite nicely. Nothing else comes apart here. Just slip it in there. Now we gotta get this weather stripping on. Just clip it in there nicely. We can put the ring back on. It goes on pretty quick and easy. Again, it’s an extremely popular remote. A four button, Ford remote head key which we call the “eight cut“. Again. very easy to do. I hope you enjoyed watching this video. Subscribe to my channel.
Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non destructive methods of entry.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>
For further information go to http://mrlocksmith.com/
A huge market right now for locksmiths is Emergency school lockdown procedures or “Active Shooter” as well as other institutions and even some commercial applications. However, for schools, there are so many security products on the market and a lot of it is just useless. Schlage has a great system. They call this the “classroom security function.” Basically, when you think about it, it is an Institutional lock so you have keys on both sides and it’s a classroom function. So again, you have keys on both sides. It’s a classroom function, but it can be locked down from the inside if there is an emergency. The Classroom teacher would have an “Emergency key” and if the alarm system or the speaker system sounds for “Lock Down Procedures” the teacher would from the inside of the door lock the door. From the inside, even though it’s got a lock on the inside, you can always open the door from the inside and it shows you which way if you can put the key in. From the outside, it’s a classroom function. When I put the key in, from the outside it becomes a storeroom function! So it’s always locked, you can’t get out, but the inside you can still come and go as you please. So, for during the day, when the school, the janitor, or the teacher, whoever unlocks the door, they do classic classroom function. Let’s unlock it. The kids can come and go as they please, it’s not a problem. If there’s a problem and you have to go to emergency lockdown procedures, all the teacher has to do is put their key in on the inside, turn it, that way, to the lock position. Now, it’s a class, it’s turned it into a storeroom function now. They can’t get in from the outside, just the teacher just simply just turn it and from the inside, you can still get out. So no matter what happens, you could always open the door from the inside and get out. From the outside, you just lock down the door. Quick, fast, efficient, easy upgrade for the school. When the “All Clear” is sounded and after the situation is over, the teacher can just turn it back into the classroom function, it’s just regular, again back to where it was. For a quick easy upgrade to your school, for emergency lockdown procedures, I highly recommend this is the Schlage, Schlage ND-Series and it’s called the “Classroom Security Function.”
In conclusion, the lock is an Institutional lock and it’s called the Classroom security. Love it, it’s absolutely fantastic for the schools. Quick, easy upgrade. Yes, there are more secure products we can install but again, for quickly getting your school retrofitted into complying with the emergency lockdown procedures, this is a fantastic product.
Mr. Locksmith Schlage ND Classroom Security Lock
Mr. Locksmith Schlage ND Classroom Security Lock
Call Mr. Locksmith for further information http://www.mrlocksmith.com/
or email: info@mrlocksmith.com
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
School or Education Lockdown / Active Shooter Locks: Schlage ND Classroom lock
BC Locksmith Licensing Requirements
BC Locksmith Licensing New Rules:
It is now official in British Columbia, Canada the Ministry of Public Safety and Solicitor General in charge of Locksmith Licensing issued by the Registrar of Security Services has now downgraded locksmith applicants and business to only three (3) requirements.
BC Locksmith Licensing Rules:
– Not presently be incarcerated.
– Not recently been convicted of molesting the dead
– Have Cheque payable to “Province of BC”
Questions about BC Security Licensing?
Toll free – 1 855 587-0185 (press option 1)
For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>