Day-in and day-out, we hear horror stories from our customers who almost got scammed by a scammer locksmith. Unfortunately, many times, people fall for the scams of these criminals.
Today, a very smart Calgary accountant did what we suggest everyone to do, think and refuse to pay. Mariya Savchyshyn owns a condo in Calgary and rents it out. She said her tenants asked her to replace their lock, and a Google search listed Locksmith Calgary at the top, so she called them without doing her searches to see that they are a scammer locksmith.
Finding out if a locksmith company is a scam is quite easy, here are a few simple steps from Terry Whin-Yates to catch them.
Tips from Terry Whin-Yates on spotting a locksmith scammer
- Do they provide unbelievably cheap pricing? The $29, $19, $39 dollar locksmith ads are a scam.
- Do they operate under different business names? Scammer locksmiths often run under different business names to shield their identity.
- Is their Google Maps location legitimate? Many locksmith scammers have their Google Maps locations out of gas stations, Starbucks locations, restaurants, or even a middle of a forest (we’ve seen it all). Pull up their location on Google street view and see where their address is, if it’s another business, it’s a fake. If it’s a house, it’s a scam. For example, the Locksmith Calgary scammer presents their address as 724 80 Ave SW, Calgary AB. This is a fake location.
Locksmith Calgary Scammer at 724 80 Ave SW
- Are they licensed? In British Columbia for example, you can check if a locksmith company is licensed or not by inputting their security license number into the following page – Security Licence Status Verification.
- Check their phone number! Copy their phone number into Google, does it appear in locations like Toronto and other provinces or states where the locksmith shouldn’t be? It’s a fake.
- Ask for the name of the business owner and a link to his or her biography, if the company is hesitant to provide the information of the owner of the company, stay away.
- Ask for ID and documentation. Do not let them start work without the company showing their security license, drivers license, insurance, and city business license. If they say “I don’t have it” or “I can send it to you later” or if it looks fake, refuse them doing the work, refuse to pay and send them away.
- If the locksmith gets aggressive or pushy with their tactics or if at any time you feel uneasy or uncomfortable, dial 911 immediately.
- Do they have a reputation? If you can’t find anything about them online such as a social media following or a clean track record, do not let them work on your property as they are most likely a locksmith scammer. Reputable locksmiths and locksmith business owners like Terry Whin-Yates, the owner of Mr. Locksmith and Mr. ProLock have a clean track record.
- Do they show up in an unmarked vehicle, or does their vehicle simply say “locksmith service” ? They are most likely a scam, do not allow them entry or to do any work on your property.
- Do they refuse to provide an invoice on the spot? Are there inflated or hidden charges? Refuse to pay and if they get aggressive, dial 911.
- Do they have a GST number on the invoice? Check if it’s legitimate here.
- Do they list their locksmiths on their website like on a team page with their name and pictures like we do with locksmith Vancouver? If not, you have to wonder why and what they’re hiding.
There are many more warning signs to catch a scammer locksmith. Just use your head and if you can’t determine if they’re fake or not, don’t use them!
One big warning sign which Mariya Savchyshyn should have caught onto was the fact that the scammer locksmith, Locksmith Calgary used the tenant’s phone to phone her. Why wouldn’t they use their own cell number? Because these scammer locksmith’s do not want repeat customers.
Scammer locksmiths such as locksmith Calgary operate on a one-hit basis. They scam you, and then they request an extreme amount of money and force you to pay. Because of the bad experience they provide, they don’t expect you to call back which is why they provide an illegitimate invoice with a fraudulent tax ID, a fake address and at often times as well, a fake phone number.
Thankfully, when the scammer locksmith called Mariya Savchyshyn to say that he’s done, she caught on. Locksmith Calgary refused to provide an itemized invoice for the inflated invoice which was triple the cost, $773.85 as per CBC.
“And I’m like, that’s weird, because usually the customer has to receive an invoice, look at it and then pay, right?” said Savchyshyn.
“I’m an accountant myself, and I know that no one is going to send me money until they see the invoice.”
When Savchyshyn refused to pay without knowing exactly what she was paying for — she says the company threatened to send the bill to a collection agency.
Terry Whin-Yates states that threats are common with scammer locksmiths. We’ve heard from people that the scammer locksmiths have gotten violent with violent threats, verbal threats, death threats and unfortunately much more.
“I just want to warn people because someone … might be scared because that company is scaring people by saying they’ll send them to collections,” she said.
“They might be scared and just pay $800 for a lock, it’s ridiculous.”
A scammer locksmith will have a hard time sending you to a legitimate collections agency. Collection agencies are not stupid, they will ask for supporting documentation which the scammer locksmiths will not have. Do not be fooled by the collection agency trick. If they do send you to collections, you can fight it by signing up to a low-cost service called LegalShield.
Company says invoices issued after payment
“Locksmith Calgary told CBC Calgary they don’t provide a billing service, even for larger companies, and require all payments be made before an invoice is issued.”
This should be an immediate red flag. No legitimate company issues an invoice after payment. We, for example always issue an itemized invoice before the customer pays, because that’s the correct way of doing business. If a customer has a question, we’re always there to answer that question.
It is ok to ask the locksmith who their credit card processor is for collecting payments. Credit card processors are the companies that collect your payment on behalf of the merchant and then provide the merchant with the funds. Names of some credit card processors are: Moneris, Square, Payfirma, Helcim, Stripe. If the locksmith doesn’t know or refuses to answer the question, refuse to pay. If they demand cash, refuse to pay.
“On their website, Locksmith Calgary lists their service call fee as $15 plus labour and hardware costs. A lock change is listed as $35 dollars and a lock re-key as $19.”
]]>
For further information go to Mr. Locksmith
5.11 Best Boots for Hot Weather
Let’s talk about something that’s a little different today. Boots.
As locksmiths, we put in a lot of hours and so we’re constantly on our feet. We’re on our feet in all sorts of weather. Today we’re going talk about my 5.11 boots that I wear all the time. The 5.11 Tactile six inch Coyote boot. They’re water resistant. I promise, these boots are water proof because I’ve been in water in them and I still got my feet dry. These boots are over five years old. And I use them daily. I have two pairs of these boots, as I alternate them. I had to put in some inserts. They just seems to make your feet feel better. And they are super-comfortable.
Two of my 5.11 Best Boots for Hot Weather
I was heading to the Philippines and that place is hot and humid. It’s absolutely terrible on the feet. I’m not a flip flop person, because I like my feet protected so I can’t walk around with flip flops. These 5.11 Tactile six inch Coyote boots are meant for hot, humid, even desert environments. I wore these for almost ten weeks straight. Every single day, in the jungle, on the water, heading to little islands (if you saw, I was in McArthur Park where general McArthur landed). I went up the hill (a bunch of hills where they had to attack bunkers, Japanese-held bunkers). This 5.11 Tactile six inch Coyote boot what I had on my feet. Although I didn’t see any snakes, there’s lots of snakes there that are bad. But it was so hot, and these were absolutely fantastic. I wore them and so I thought next time I go down to Florida, Texas, I’m gonna be wearing these. These are my go-to boots now in the summer time. They’ve got this antibacterial stuff, and all sorts of bits and pieces. You can read about it online. These were super comfortable. I definitely recommend this. I’m heading back to Asia and I’m wearing these. I bought a second pair. I always like to alternate my shoes, so I’ll have these again, because they’re FANTASTIC.
5.11 Best Boots for Hot Weather 2
However, I think the only downside, when I jumped off of a boat into the salt water, I got both wet, and it didn’t take that. It took probably about four hours in the sun to dry ’em out. And it kinda pissed me off a little bit. It means that it’s not meant to go in the water. You’re gonna get wet feet if you do that. Nevertheless, for 99% of what I did, these were absolutely fantastic. The water resistance might not be that good but, they’re so comfortable I don’t wanna add anything to them. So, if anybody has any good ideas on a boot that’s good for super hot, humid, almost desert-y jungle conditions, that has some water resistance, I’d be really interested in knowing because that’s the only downside of these boots. Other than that, 99.9% absolutely fantastic. Super super comfortable. I liked it so much that I bought a second pair. And again, this is different and nothing to do with locksmithing, but we gotta have comfortable feet. I hope you enjoyed watching this video. Subscribe to my channel. Also visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced. As well as my covert methods of entry and my non-destructive methods of entry.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
]]>
For further information go to Mr. Locksmith
Let us talk about three of the must have tools you have to have for your locksmith kit. Every one locksmith must have these three tools: Megapro set, Hex set, and the Tamperproof kit.
The Megapro set
The Megapro set – this is the original and inside it it has the flatheads, the Robinsons, the Phillips and some torques. That is absolutely fantastic. It’s a go-to tool. It’s always there, it’s got the tools.
The next one on my kit – the Hex set.
The Hex set
The Hex set – It’s got all the basic or the most popular sizes in it. You have to have this screwdriver if you’re a locksmith because so many times you’ve misplaced your Allen keys. This is, a must have, fantastic tool. Especially we’re getting a lot of European made locks out there. you still need complete Allen key sets, but you can just grab this and 90% of the time, if not more, this will do the trick.
The other one is the Tamperproof kit.
The Tamperproof set
Tamperproof kit – This is the MegaPro. What it is, it’s for taking out the tamper-proof screws. It’s got all the most popular tamperproofs and torques an dthe flatheads with the holes inside. It is really, really cool.
So these are the three must have tools for everybody. You gotta have these in your locksmith kit. The original MegaPro, it’s got the most popular screws you’re going to run across every single day. The Hex, because you’re running across a lot of these in locks now, more and more all the time, this will probably, used 90% of the time, you’ll still need an Allen key set but it does the trick. And the Tamperproof. This will do for taking out those one way screws that are flatheads and it’s got the special bit for taking out the one way flatheads. It’s got the hex with the hole in it and the torques with the hole in it. Must have tools for the locksmith. For a beginner or a pro, this is a lifesaver. Have a good day. I hope you enjoyed watching this video.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities
]]>
For further information go to Mr. Locksmith
Unboxing Lock Tech GM Ignition Removal Tools
So we have a new “toy”, from LockTech. Instead of an unboxing, we will call it an “unbagging”. It’s a full set from AccuReader LockTech. And this is the ignition removal tools. A onewhole set, is all four of them. Rather than buy one at a time, just buy the whole thing. It would save you some money. And again, this is an unbagging, not unboxing. It has never been opened, and it will be the first time of us “playing” with it. We’ve been using AccuReader LockTech’s tools for years, so it is the first time getting like the whole little set here.
So get that there. It is a total unbagging. They’re easy to tell apart which is kinda cool. So we’ve got a blue side, a yellow side, a green one with a toy. So we got the whole set here of four. Most of their products, by the way are extremely well made. So it does the trick. And we’ll show this in action, this is just an unbagging today, we’ll show it in action down the road.
These four different tools, they call it the V1, V2, V3, V4. And this’ll take out the ignitions on a whole lot of cars like the Chevrolet Cruzes, Chevrolet Colorado, Silverado, the Alero. It is an interesting tool for me. It’s removing the ignition cylinders from GM vehicles without drilling or damaging which is very cool. We’ve had their other products even before. Some of these are earlier ones, but they’re as fantastic. Instructions comes with the bag.
All four (4) of GM Ignition Removal Tools Set
We’ll post some videos of us playing with this. So I hope that helps a little bit. We will play with some ignitions later, but right now this is just an unbagging of a brand new “toy” from AccuReader LockTech for us. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my nondestructive methods of entry.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities
]]>For further information go to Mr. Locksmith Automotive
Changing Ford Remote Battery
This is a very popular Ford key and we call it the “eight cut“. It’s a four button, remote head key. If it’s tons of the Mustangs, or if it’s the whole Ford line, it is all over the place. It’s very popular. There is no screws on this one. If there is a ring, just get the ring out of the way. To remove the battery, put the quarter, or a flathead in and then just give it a little twist. It will come apart very easily. It’s got weather stripped. And then just flip out the battery. So this one is the CR2032, which is an extremely popular battery.
To put the battery in, you just gotta slide it in and that’s perfect. So we’ve done a very good weather stripping on this. So there we go. There is our Toyota remote.
Mr. Locksmith CR2032
Steps on how to change a Toyota remote battery:
- First, see if it had the ring on. If so, just take the ring off.
- Use your Leatherman or flathead screwdriver. There are no screws. You can tell by looking at the fob.
- Just give it a little twist (make sure you don’t take much force).
- And make sure to do it without everything falling every which way.
I like the Energizers and the Duracells for Ford remote battery. I don’t like the dollar store ones, that always seems to be giving people problems. And I don’t like the inexpensive ones. Fits in quite nicely. Nothing else comes apart here. Just slip it in there. Now we gotta get this weather stripping on. Just clip it in there nicely. We can put the ring back on. It goes on pretty quick and easy. Again, it’s an extremely popular remote. A four button, Ford remote head key which we call the “eight cut“. Again. very easy to do. I hope you enjoyed watching this video. Subscribe to my channel.
Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non destructive methods of entry.
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive Locksmith: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>
For further information go to Mr. Locksmith Automotive Ford.
A car theft tried to steal a 1995 Ford Super Duty Pickup in Abbotsford and damaged the ignition but was unable to start the Ford Pickup Truck. However, the Ford ignition was so severely damaged and the key could no longer turn the ignition and start the Pickup Truck. Randy from Mr. Locksmith Automotive was able to remove the damaged Ford Ignition and rekeyed the replacement ignition to match the existing ignition and door keys.
Specialized Auto Locksmith Services
Mr. Locksmith Automotive(604) 259-7617 team up with highly trained auto locksmiths who effectively carry out car lockout solutions including lock picking, transponder key programming, ignition key replacement, and more! Whether you have lost keys, have a broken key in the ignition, or are locked out of car, Mr. Locksmith Automotive understands the importance of a fast response time.
With technicians available across multiple locations, an expert locksmith can arrive at your location within 30 minutes of your call! Auto locksmiths can work on a wide range of car brands, models, and key types (e.g., transponder key, remote key, ignition key, remote keyless entry, etc.).
Auto locksmith services include:
- Car lockout solutions
- 24 hour emergency locksmith care
- Ignition key replacement
- Ford Ignition Replacement
- Extraction of broken key
- Transponder key programming
- Key Fobs Replacement
- Expert lock picking
- Open trunk solutions
- Spare care key making
With the advances in auto security, key replacement can become an expensive and time consuming endeavor. By partnering with auto locksmith experts, key programming can be achieved on the spot! Chip keys can be duplicated or reprogrammed. No towing required. No need to turn to the dealership, which is likely to be a more expensive route. Trusting your car lockout situation with non-experts can result in damage to your car or faulty ignition key replacement or programming results. Lock picking should be handled by professionals who possess the skill and tools to safely open car doors. If you need to open trunk, technicians are very familiar with effective techniques across a wide range of car brands and models.
Mr. Locksmith Automotive and associates have the skill and knowledge to perform lock picking, extract a broken ignition key, and replace an immobilizer key, chip key, transponder key, and more! You can trust that your vehicle is in expert and reliable hands!
Locksmiths are located in multiple locations in order to respond to your call within 30 minutes. You can call Mr. Locksmith Automotive anytime, any day. Our customer service line is open 24 hours a day, 7 days a week, 365 days a year!
Replace 1995 Ford Super Duty Pickup Ignition in Abbotsford Mr. Locksmith Automotive
Replace 1995 Ford Super Duty Pickup Ignition in Abbotsford Mr. Locksmith Automotive
Replace 1995 Ford Super Duty Pickup Ignition in Abbotsford Mr. Locksmith Automotive
Damaged Ignition 1995 Ford Super Duty Pickup in Abbotsford Mr. Locksmith Automotive
Remove Ignition lock 1995 Ford Super Duty Pickup in Abbotsford Mr. Locksmith Automotive
If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email Randy@mrlocksmith.com
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>
For further information go to Mr. Locksmith
Visited the Chilliwack Corn Maze & Pumpkin Farm in Chilliwack BC on 41905 Yale Road West, Chilliwack, BC V2R 4J4. The Original Chilliwack Corn Maze features a 12 acre maze and tons of attractions for the whole family and has been operating the corn maze since 1999. Lots of fun for the entire family or a date.
Chilliwack Corn Maze and Pumpkin Farm Tractor
Chilliwack Corn Maze and Pumpkin Farm Welcome
Chilliwack Corn Maze and Pumpkin Farm Tractors
Chilliwack Corn Maze Entrance
Chilliwack Corn Maze and Pumpkin Farm
Call Mr. Locksmith for further information http://www.mrlocksmith.com/
or email: info@mrlocksmith.com
Mr. Locksmith Vancouver
Vancouver Locksmith Main: (604) 239-0882
Downtown Vancouver Locksmith: (604) 262-1907
Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>
For further information go to Mr. Locksmith Abbotsford.
I wanted some local Honey for my tea and also wanted to try some Mead wine. Mead wine is an ancient “honey wine”, thought by many to have been the first alcoholic beverage made by man. Mead, the drink of the so-called “Age of Gold” in Greece, originated on the island of Crete and was known for its mystical properties. Referenced by the great philosopher Aristotle, mead was often produced by monks in Northern Europe, where grapes were scarce.
One the few places in Vancouver and the Lower Mainland is Campbell’s Gold Honey Farm and Meadery and is located in southwest Abbotsford adjacent to Aldergrove south of the Fraser Hwy.
They had Mead Wine and Honey Tasting. I really liked the Merry Mead and the Crofter’s Choice Mead wine. Also, I chose the Campbells Gold Floral – Des Fleurs Canada No 1- Dark Amber Honey. My Mead Wine is now in my Wine cabinet and I already had my first cup a tea and honey on this rainy day. Tomorrow, Honey and Toast! Again, locally made in Abbotsford, BC.
Mr. Locksmith Abbotsford Aberdeen Honey Farm & Meadery
Mr. Locksmith Abbotsford Aberdeen Bee Crossing
Mr. Locksmith Abbotsford Aberdeen Honey Farm & Meadery Halloween
Mr. Locksmith Abbotsford Aberdeen Honey Farm & Meadery Open
Mr. Locksmith Abbotsford Aberdeen Mead Wine
Mr. Locksmith Abbotsford Aberdeen Local Honey
Call Mr. Locksmith Abbotsford for further information www.mrlocksmithabbotsford.com
or email: info@mrlocksmith.com
Mr. Locksmith Abbotsford 604-200-8622
Mr. Locksmith Main: (604) 239-0882
Mr. Locksmith Downtown Vancouver Keystore: (604) 669-8008
Mr. Locksmith Automotive: (604) 259-7617
For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training
For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/
]]>